Ceramic Three Roll Mill

The diameter of the rollers of the ceramic three roll mill is 65-260mm. The mill gets rid of the defects of the traditional three roll mill. Like the conventional three roll mill, it faces corrosive, acidic, alkaline, and other materials. When grinding, it is easy to cause the surface of the roller to corrode, but the ceramic roller greatly increases the use limit of the three roll mill. When grinding with the material, it will not have any chemical reaction, not only has extremely high corrosion resistance, cooling system It has its characteristics.

Advantages of a ceramic three roll mill
The characteristics of the cooling system of the ceramic three roll mill are that each roller adopts an independent high-efficiency sealed cooling device, and the device can also be adjusted by itself. The pressure system of the hydraulic roller also has high stability and high output. , to meet the production efficiency required by the enterprise. The ceramic three roll mill has two working modes, one is the hydraulic type and the other is the pneumatic type. The pneumatic type three-roll grinder also has an explosion-proof function, and the safety level is extremely high, ensuring the safety of the entire production process. It can also ensure that the production is clean and tidy so that the whole process can be carried out on the premise of no pollution.

Model selection of ceramic three roller mill
The mechanical gap adjustment device of the ceramic three roll mill can set a specific roller gap according to requirements. This setting can meet the grinding of various viscosity materials. Users can make a stainless steel body or a stainless steel upper cover according to their own needs. In the form of the optional PLC control system, through the graphical interface to control and select various parameters, the user can easily operate the roller temperature, speed, pressure, and gap. Whether the speed, roller pressure, or gap can be electronically controlled to ensure the accuracy of grinding fineness.

Requirements for speed regulation of ceramic three roll mill
1. Before adjusting the speed, it is necessary to check whether the various parts of the three roll mill are normal, fill in oil as required, and then turn on the power.
2. There are left and right runners on the three roller mill, and the front and rear of the left and right runners are adjusted according to requirements until the three rollers can work normally.
3. If there is dirt or other hard objects on the surface of the roller, you need to wipe it with a soft paper towel or clean gauze, and then loosen the baffle.
4. Adjust the front and rear rollers and the middle roller according to your own needs, and idle for 1-2 minutes when the power is turned on.
FRANLI produces various types of three roll mills. As a three roll mill manufacturer that has been in business for more than 20 years, it not only has a variety of types in the selection of machines but also can carry out 100% according to the needs of the industry. If you are still looking for a suitable three roll mill supplier, you can contact FRANLI directly, and our engineers will provide you with the best solution within 24 hours.