How to use a high-speed disperser safely
A high speed disperser is also called a high speed mixer. This high speed disperser is suitable for high speed stirring, dissolving, and dispersing of liquid and liquid-powder phase materials in coatings, dyes, inks, pigments, cosmetics, resins, adhesives, emulsions, medicine, petroleum, etc. The speed can be adjusted arbitrarily (0 -1440 rpm). It can also be used for beating and dispersing texture paint, texture coating, and texture mortar.
1. Make the slurry flow in a rolling annular flow, producing a strong vortex, and the particles on the surface of the slurry spirally descend to the bottom of the vortex;
2. A turbulent area is formed at the edge of the dispersion plate at 2.5-5mm, and the slurry and particles are strongly sheared and impacted;
3. The upper and lower beams are formed outside, and the slurry is fully circulated and turned;
4.The laminar flow is under the dispersion plate of the high speed disperser, and the slurry layers of different flow rates diffuse each other to play a role in dispersion.
The common forms of high speed dispersers are generally divided into hydraulic, pneumatic, and mechanical lifting, and other forms.
such as Polyurethane waterproof coating grinding and dispersing machine, polyurethane waterproof coating high speed dispersing machine, polyurethane waterproof coating high-shear dispersing machine, polyurethane waterproof coating vertical grinding and dispersing machine, polyurethane waterproof coating high speed dispersing machine, polyurethane waterproof coating 14000 rpm grinding and dispersing machines.
Notice for high speed Disperser Safe Operation
2. After the material tank is pushed in, descend the high speed Disperser During this process, the head or hand is prohibited from placing between the material tank and dust cover to prevent injury or fatal accidents. When the tank has descended to its position, start-up the main engine to mix.
3. If the material tank can not be clamped tightly, the main engine can not be started.
4. During operation, watch current whether there is an overloading operation. If overloading is found, the machine shall be stopped to check the reason and started up again after certain measures are taken.
5. When the main motor is rising, it cannot be started.
6. If the operator leaves the operation area, the power switch of the manipulation box shall be turned off to prevent accidents happen.
7. All operations should be conducted by professional operators. Other personnel is not allowed to operate the machine without permission.
8. During operation instruments should be observed constantly. If an abnormality occurs, pressing an emergency button to stop the operation of the machine.
9. high speed Disperser shaft is not allowed to appear reversing the condition.
Notices of installation high speed Disperser
The leveling of the foundation surface shall be guaranteed, or else the normal usage of the machine may be affected.
Wiring can only be operated by qualified technicians.
A high speed Disperser must be provided with a reliable grounding system. Check whether the power supply standard meets provisions.
After wiring is finished, commissioning shobe made when all protection facilities are initiated.
Be careful with waste disposal, cleaning, recycle and treatment to avoid environmental pollution.
Copyright Notice :
This article only represents the author’s point of view.
This article is published under the authorization of the author.
Source: Franli
This article address : How to use a high-speed disperser safely
Related Products
Bead mill for paint
The application fields of liquid coatings are very wide, so a bead mill for grinding high-quality and high-fineness coatings is required.
SMP Agitator bead mill
This SMP Agitator bead mill is used in the paint, ink, and coating industries to ready the equal-sized particles of a particular material.
Dispersion Machine
This HSD-D Dispersion Machine with two shafts for mixing and dispersing materials to reach higher efficiency. This machine should be installed jacket tank with a cooling system. The dispersion machine has two shafts working temperature
News
Laboratory Reactor: Guide to Stirring System
The laboratory reactor is composed of a pot body, a pot cover, an agitator, a jacket, a support and transmission device, a shaft seal device, etc.
Grinding Media for Bead Mill | Zirconia Beads & Zirconium Silicate Beads
Bead mills mainly use grinding balls as media, and use impact, extrusion, and friction to achieve the final grinding effect, which mainly depends on the size and hardness of the grinding beads, the filling rate of the grinding beads, and the collision frequency adjustment between the grinding beads and the particles.
Overview of Laboratory Reactor
Laboratory reactors, also known as lab reactors, are essential tools in scientific research, product development, and process optimization. These reactors provide a controlled environment for conducting chemical reactions, mixing, dispersing, and homogenizing processes.
Bead mills | Manufacturing technology in various industries
Bead mills, also known as sand mills or grinding mills, are versatile machines widely used across various industries for the wet grinding and dispersion of solid particles in liquid media.
Ribbon Blender Mixer Equipment
A ribbon blender mixer, also known as a ribbon mixer or horizontal ribbon blender, is a powerful industrial machine designed for thorough and efficient blending of various materials.
What is A Stainless Steel Reactor？
Stainless steel reactors are essential equipment in various industries, including chemical, pharmaceutical, biotechnology, and food processing.
