What Makes An Ointment Mill A True Expert?

Home » What Makes An Ointment Mill A True Expert?

What Makes An Ointment Mill A True Expert?

The world’s first high-pressure roller grinding machine ointment mill uses the application layer crushing mechanism. It can be used in nonferrous mining, oxidation; the pellet was broken, grinding and used in cement with a rolling machine. Because of its high efficiency, Mobile jaw crusher energy savings, significant investment, easy maintenance, province, and the benefits of working environment, it is widely recognized as an advanced crushing and grinding machine.

High-Pressure Roller Mill structure

The high-pressure ointment mill comprises the following components: the two-level set and the synchronization extrusion roll device of four extrusion vices, one fixed and one rotating. Each rolling extrusion device has its structure, which can transport energy rolls and material through the adjustable feeder device to two rolls of 2 in between the material cavity. The automatic lubrication of the bearing is central to the equipment. It provides the grease. High-pressure roller mill control parts mainly according to the test the system provides a signal. The automated control system for monitoring equipment can be divided into the site, machine, and central control three control modes.

The features of the high-pressure roll grinding machine

Units grinding high energy consumption, Magnetic roller separator high production efficiencies because of high pressure rolling mill make full use of the laminated broken working mechanism. The contact point between particles is stronger, which is mainly why crushing probability and characteristics have improved. It can be used to grind wet materials with high water content. Drying takes a lot of energy, and wet products that are being ground must be precipitated and processed. Roller materials with less than 10% water content cannot only make the fabric cushion of high-pressure rollers more comfortable but also extend the service life of the extrusion roll. The current hard alloy column nail surface has a small amount of abrasion.

Increase follow-up work product quality and recovery

Under high pressure, the role of grains of a group of materials within the particles in their interior and mineral waste rock around its interface between the local pressure created numerical range. The pressure-sensitive particle ingredients in these components bear the ability to withstand stress. To improve the product quality and mineral recovery, sulfide-ore deposits can be shattered.

Covers a smaller area, the investment province

In the milling methods, industries thereby demand quite fine, dry powder materials that are driving off the innovations. Since fluidization prevents the dry material from agglomerating as well as a clump, fluidized bed jet mills are considered to be a great candidate in terms of grinding. In some of the cases here, dispersing agents can be added in order to prevent this agglomeration along with the additives that are unwanted within the end product.

The nano-range of the particle sizes will also be drying the feed material that is enabled through the jet milling process.

For the materials that are sensitive to heat, this is the technique that might not be suitable, but the bed jet mills that are fluidized can be used in terms of getting the nanoparticles in a greater range of minerals as well the pigments here.

Factoring the right method for your material

High-pressure roller grinder machine, because its structure is compact and equipment lightweight, features small size, it covers a lesser area. Due to the interactions between the two rolls of pressure, which is produced mainly by impact extrusion frames, the grinding effects are mostly in the interaction of the two rolls.

In response to the government’s call to protect the environment, the coal industry developed high-efficiency and energy-saving rolling crushers. It was becoming more common for industries to focus on energy conservation and environmental protection. Most crusher manufacturers face this challenge. Future trends will be low consumption and environmentally friendly roll crusher equipment. Hanging has developed a range of roll crusher machines with low carbon energy savings, green and environment friendly to satisfy consumers’ needs. This roll crusher is used extensively in silicate, coal, cement, and other industrial areas. You can divide the roll crusher into a plain roller or tooth surface roller. The former is used for crushing medium-hard materials, while the latter is used for brittle and soft materials.

The Roller crusher is divided into two roller crushers and four roller crushers depending on how many rollers are used. The Roller Crusher has the following features: stable operation, easy maintenance, and low cost. It can also be adjusted in terms of output size. The Roller Crusher can process fragile materials in the chemical, power generation, and cement industries.

Uses and Advantages of an Ointment Mill

These vertical roller mills are widely used in the fields of fertilizer and mining, building materials.

The Vertical ointment mill operates by having the reducer on the top of each main unit rotate with the central axis connected to the couplings. And then, the grinding roll cradle will spin and roll around the inner surface. From the side top of the machine, the materials will be fed into the feeding hopper and divided into two sections. After that, the materials will spread around the central axis. Then they will evenly enter the space between the grinding ring and the roller with the help of the circle tunnel. The materials will then be ground and crushed using the roller and then discharged via the outlet.

For coarse grinding materials, after the board, place the single container into the second warehouse. The warehouse is lined with flatlining and steel balls inside. To complete the grinding operation, the powder is discharged from the discharge grate plate. The structural ointment mill characteristics of the ball mill are determined from the feeding, discharging, Rotary Department, Transmission Division (reducer small transmission gear motors, electrical controller), and other major parts. Hollow shaft with steel casting. They are lining Replaceable. The body is inlaid with cylinder liner wear.

The density of the setting and the speed required determine the final result of materials fineness. Because of the high-duty work they get; the ointment mill needs to be reliable and can provide long-lasting service. Many materials can be mixed, homogenized, or homogenized depending on their purpose. You can pulverize soft, hard, elastic, and hard materials to a fineness of up to 100mm.

You can choose from many different models depending on your material and input feed size. Select ointment mill models may include stainless-steel knives for grinding corrosive material, jar chutes for examining the finished product and easy storage of samples, and stainless-steel sieves which prevent samples from entering a chute without first passing through a screen. To prevent contamination of the grinding bowls, it is important to use compatible materials for the balls and bowls.

Many reputable companies like Franli are well versed in the dynamics of the Ointment mill. Several patents have been filed by these companies, including the first laboratory-planetary mill with cantilevered bowls. While many lab mills are well-known, you should always select a supplier with care. While there are many highly reputable companies out there, it is worth researching first.

Copyright Notice :
This article only represents the author’s point of view.
This article is published under the authorization of the author.
Source: Franli

This article address : What Makes An Ointment Mill A True Expert?

Related Products

all

Basket Mill With Mixer

Basket mill with mixer is an indispensable equipment in coatings, ink, cosmetics, and other industries. Its main function is to provide multi-functional dispersion.

Contact ➔

29 July

all

High Shear Emulsifier

The high shear Emulsifier is widely used in the experimental fields of liquid mixing, emulsification, liquid/solid powder dispersion, and slurrying in biology, physics, chemistry, cosmetics, health care products, food, paint, coatings, and chemicals.

Contact ➔

29 July

all

Z Blade Mixer

The Z blade mixer is made for extensive mixing, kneading, and stabilizing strong and high viscous materials, such as bubble gum bases, bread, caramel mass, body wash platform, and glue.

Contact ➔

29 July

News

Laboratory Reactor: Guide to Stirring System

18 June

The laboratory reactor is composed of a pot body, a pot cover, an agitator, a jacket, a support and transmission device, a shaft seal device, etc.

Grinding Media for Bead Mill | Zirconia Beads & Zirconium Silicate Beads

17 June

Bead mills mainly use grinding balls as media, and use impact, extrusion, and friction to achieve the final grinding effect, which mainly depends on the size and hardness of the grinding beads, the filling rate of the grinding beads, and the collision frequency adjustment between the grinding beads and the particles.

Overview of Laboratory Reactor

28 May

Laboratory reactors, also known as lab reactors, are essential tools in scientific research, product development, and process optimization. These reactors provide a controlled environment for conducting chemical reactions, mixing, dispersing, and homogenizing processes.

What Makes An Ointment Mill A True Expert?