Correct operation of the FRANLI sand mill
The sand mill may only be used for the task specified, The correct application is the continuous dispersion and wet grinding of solids suspended in the liquid.
The sand mill (also called bead mill 
)may only be used for the task specified, The correct application is the continuous dispersion and wet grinding of solids suspended in the liquid. pls, check the specific instruction of the FRANLI sand mill as below.
When operating the sand mill, no products/materials may be processed which under the influence of pressure, temperature and shear might produce uncontrolled reactions, such as a rise in viscosity or temperature, spontaneous increase in hardness, foam formation, or gas secretion, by which sand mill ratings might be exceeded, be only for a short time.
We advise that even within the limits of the sand mill ratings, the sand milling process might change some product characteristics in an unacceptable way or oven destroy them.
Ensure before operating the sand mill that the product will not react in an undesirable or even uncontrollable way to the sand milling process.
The material to be milled must be pumpable and its viscosity must not increase in the dispersion/milling process in such a way that the product pump can no longer discharge sand milled material.
Proper use also includes compliance with the manufacturer’s commissioning-, operation- and servicing instructions (operating instructions), as well as attention to avoidable inappropriate behavior. The sand mill may only be operated and maintained by qualified employees who are familiar with the sand mill and have been informed about potential dangers.
Any other uses will be considered improper. The manufacturer does not accept liability for any damages resulting from improper use.
The operating instructions constitute part of sand mill delivery and, in the case of resale. Must be passed on to the new owner.
Despite all precautions, some dangers may remain when operating the sand mill. Residual dangers are potential, not very obvious hazards, such as:
Injury during sol-up, especially from worn, sharp-edged Agitator discs
Fire risk from leakages
Risks caused by the product of the rinsing medium, such as allergies, skin irritations, or burns
Risk because of malfunctions of the control system
Risks involved in operating electronic controls
To avoid the above problems, following the above points of instructions is necessary, which also will protect the sand mill and make its service lift longer.
FRANLI has more than 20 years of experience in the performance research of sand mills, and for sand mills or related wet grinding industries, we will cooperate with the design and manufacture of a complete set of production lines. If you are still looking for related production lines or Sand mills, you can get in touch with us at any time.
Proper use also includes compliance with the manufacturer’s commissioning-, operation- and servicing instructions (operating instructions), as well as attention to avoidable inappropriate behavior. The sand mill may only be operated and maintained by qualified employees who are familiar with the sand mill and have been informed about potential dangers.
Any other uses will be considered improper. The manufacturer does not accept liability for any damages resulting from improper use.
The operating instructions constitute part of sand mill delivery and, in the case of resale. Must be passed on to the new owner.
Despite all precautions, some dangers may remain when operating the sand mill. Residual dangers are potential, not very obvious hazards, such as:
- Injury during sol-up, especially from worn, sharp-edged Agitator discs
- Fire risk from leakages
- Risks caused by the product of the rinsing medium, such as allergies, skin irritations, or burns
- Risk because of malfunctions of the control system
- Risks involved in operating electronic controls
To avoid the above problems, following the above points of instructions is necessary, which also will protect the sand mill and make its service lift longer.
FRANLI has more than 20 years of experience in the performance research of sand mills, and for sand mills or related wet grinding industries, we will cooperate with the design and manufacture of a complete set of production lines. If you are still looking for related production lines or Sand mills, you can get in touch with us at any time.
Despite all precautions, some dangers may remain when operating the sand mill. Residual dangers are potential, not very obvious hazards, such as:
- Injury during sol-up, especially from worn, sharp-edged Agitator discs
- Fire risk from leakages
- Risks caused by the product of the rinsing medium, such as allergies, skin irritations, or burns
- Risk because of malfunctions of the control system
- Risks involved in operating electronic controls
To avoid the above problems, following the above points of instructions is necessary, which also will protect the sand mill and make its service lift longer.
FRANLI has more than 20 years of experience in the performance research of sand mills, and for sand mills or related wet grinding industries, we will cooperate with the design and manufacture of a complete set of production lines. If you are still looking for related production lines or Sand mills, you can get in touch with us at any time.
In the end, wish you are all who read this article, has a great and happy life. Go ahead with your dream also take care of yourself. Franli is always here for you.
Copyright Notice :
This article only represents the author’s point of view.
This article is published under the authorization of the author.
Source: Franli
This article address:Correct operation of the FRANLI sand mill
Related Products
Lab Basket Mill
The lab basket mill is a common equipment for small-scale experiments and scientific research. Suitable for wet grinding of medium and low viscosity materials. It integrates dispersion, grinding, and integration.
Turbine bead mill
FRANLI turbine bead mill is a kind of nano mill, which is mainly used in medicine, food industry, agrochemicals, cosmetics industry, papermaking, life sciences, microbiology, fillers, and other industries.
News
Laboratory Reactor: Guide to Stirring System
The laboratory reactor is composed of a pot body, a pot cover, an agitator, a jacket, a support and transmission device, a shaft seal device, etc.
Grinding Media for Bead Mill | Zirconia Beads & Zirconium Silicate Beads
Bead mills mainly use grinding balls as media, and use impact, extrusion, and friction to achieve the final grinding effect, which mainly depends on the size and hardness of the grinding beads, the filling rate of the grinding beads, and the collision frequency adjustment between the grinding beads and the particles.
Overview of Laboratory Reactor
Laboratory reactors, also known as lab reactors, are essential tools in scientific research, product development, and process optimization. These reactors provide a controlled environment for conducting chemical reactions, mixing, dispersing, and homogenizing processes.
Bead mills | Manufacturing technology in various industries
Bead mills, also known as sand mills or grinding mills, are versatile machines widely used across various industries for the wet grinding and dispersion of solid particles in liquid media.
Ribbon Blender Mixer Equipment
A ribbon blender mixer, also known as a ribbon mixer or horizontal ribbon blender, is a powerful industrial machine designed for thorough and efficient blending of various materials.
What is A Stainless Steel Reactor？
Stainless steel reactors are essential equipment in various industries, including chemical, pharmaceutical, biotechnology, and food processing.
